Dahua VTO5110BW Kullanıcı Kılavuzu - Sayfa 10

İnterkom sistemi Dahua VTO5110BW için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dahua VTO5110BW 15 sayfaları. Villa door station vto5000 series; vto5x00cx series

Sayfayı Yazdır

3 Basic Function Introduction

3.1 Call User

3.1.1 Connect

VTO is connected to VTH via network connection. At VTO, You can touch the button

to call all VTHs of designated user. During connecting, you can touch the button on VTO

to end call at any time.

3.1.2 Call

Under connecting status, if the call is picked up by any VTH, other VTHs will enter

standby status (These VTHs may join call by pressing call button, or enter monitoring

status by pressing monitor button.), and you will enter calling status. Each VTH that joins

the call may end call independently from other VTHs.

3.2 Monitor

Video captured by this VTO can be viewed from multiple VTHs.

3.3 Issue Card/Delete Card

3.3.1 Issue Card

Press menu button on VTH to issue card. Press SOS button to switch menu and

select to issue card. VTH will then enter issuing card mode, and you will see prompt

saying issuing card on screen. Now swipe card at card reading area until you hear a beep

which means you have successfully issued card. Press touch button on VTO to exit.

3.3.2 Delete Card

Press menu button on VTH to enter deleting menu. Press SOS button to switch menu

and select to delete card. You shall confirm deletion by pressing call button. After deletion

completes, you will see prompt saying delete card successfully.