Dover TWG TULSA WINCH 506W Servis Kılavuzu - Sayfa 13

Vinçler Dover TWG TULSA WINCH 506W için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Dover TWG TULSA WINCH 506W 18 sayfaları.

SERVICING THE PLANETARY SET

1. Remove the retaining rings from the planet pins.

2. Remove the pins from the carrier by carefully tapping them out.

3. Remove the planet gears, washers and bearings from the carrier.

4. Inspect the pins, bearings, and gear bores for evidence of wear and replace if necessary.

5. Before reassembly, be sure to insert the thrust plate into the carrier.

6. To reassemble, be careful to line up the planet pins with the washers and bearings then press

the knurled part of the pin into the carrier. If the pins are not lined up properly, the washers

can be shattered during the pressing operation.

7. Replace the retaining rings onto the planet pins.