amphis 109001BW-24 Kurulum Kılavuzu - Sayfa 7

Fan amphis 109001BW-24 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. amphis 109001BW-24 8 sayfaları. 3 blade ceiling fan

L U N A – I N S T A L L A T I O N M A N U A L

C E I L I N G F A N M A I N T E N A N C E

1 Ceiling fan is a rotating product. Make regular inspections on the hanging system,

blade holders, blades and various parts of this product to prevent them getting loose.

Recommendation is inspection twice a year to ensure safety.

2 Regularly clean the ceiling fan, wipe lightly with a soft brush or cleaning cloth.Avoid using a

damp cloth or destructive cleaning detergents.

3 Do not use lubricating oil on any parts of the ceiling fan.

WARNI N G

If unusual oscillating movement is observed, immediately stop using the ceiling fan and contact

the manufacturer, its service agent or suitably qualified persons.

The replacement of parts of the safety suspension system device shall be performed by the

manufacturer, its service agent or suitably qualified persons.

If it is necessary to replace the live or neutral brushes to ensure operation of the

motor then both brushes and the earth brush need to be replaced at the same time. The

brushes shall only be replaced by a suitably qualified person.

MAINTE NA N CE TI PS

• Always switch off the main electric supply at the circuit breaker fuse box before carrying out

any maintenance job to avoid any hazards.

• Do not use any detergent or corrosive acidic solution to clean the ceiling fan.

• Never oil the ceiling fan motor. The motor is created with a lubricated sealed ball bearing.

• If you are unsure of any steps, you can reach us at the email address and contact number

listed on the last page of this manual.