Ampler Curt Kullanıcı Kılavuzu - Sayfa 5

Bisiklet Ampler Curt için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ampler Curt 16 sayfaları. 2019

5/16

Adjust the seat height

Turning the bike on

Charging the bike

V1.1, 24.04.19

Assembly

Take the 6mm hex key and adjust the perfect seat height

1. Place the bike in a way that allows you to support

yourself against a wall when sitting on it.

2. Put one pedal in its lowest position.

3. Hop on and try to reach the pedal with your heel.

4. You have the perfect seat height when you are able

to place your heel on the pedal with an almost fully

stretched leg.

And you are good to go!

6 mm

Power on the bike

Just press the power button on the power panel,

located on the left side of the bike. The bike is

already fully charged when you receive it.

Charging the bike is like charging a laptop. Just con-

nect the bike with a standard wall power outlet (110–

240 V AC) and hook the magnetic charger plug to the

charging socket located on the power panel and let it

to charge.

Once the led on the charger turns from red to green

it has been fully charged. It takes about 2.5 hours

from drain to full.

Ampler charger will automatically stop charging when

the battery is full. There is no risk of overcharging the

battery when you forget to unplug it.