Ampler Curt 2020 Manuel - Sayfa 5

Bisiklet Ampler Curt 2020 için çevrimiçi göz atın veya pdf Manuel indirin. Ampler Curt 2020 18 sayfaları.

Insert the pedals

Mount the refl ectors

V2.3 03.11.20

Assembly

1. The pedals are marked with R (right) or L (left). The R pedal goes

on the chainwheel side and the L pedal goes on the non-chain-

wheel side.

2. Tighten the pedals with the 6 mm hex key.

Pedals need to be tight so make sure you put some force into it.

Expect resistance only at the end of the thread, if the pedal is hard to

thread in from the beginning then the threads must be inspected.

left

right

1. Clamp the white front refl ector below the front light.

2. Attach the red rear refl ector to the bracket. Wrap the bracket

around the seat post and secure it with the screw.

3. Attach one orange refl ector on the front wheel, one on the rear

wheel. Pick a spoke, place the refl ector on the spoke and push the

clasp at the refl ector mount. Fasten it with a screwdriver.