Combi-Camp Valley Talimatlar - Sayfa 8

Çadır Combi-Camp Valley için çevrimiçi göz atın veya pdf Talimatlar indirin. Combi-Camp Valley 18 sayfaları.

IN T E GR ATED SU N

C A N OPY/AWNING

Erection of integrated,

sun canopy/awning

The frame system is shown in fig. 6

Fig. 6

• The body canvas is lowered by use

of two thumb screws, so that all

force is reduced from the tent

canvas and the integrated frames

can move freely. The canvas is

now zipped on to the COMBI-

CAMP.

• The sun canopy is put on top of

the integrated frames, whilst they

are pulled out. Both the frames 25

mm and 22 mm are pulled out,

such as the little pressure spring is

engaged into the 25 mm frame

and this is pulled out 3/4 way.

• Hereafter the front section of the

frame is attached (fig. 6). Now the

frame is adjusted so that the

canvas is nice and tight.

• The height is adjusted on the two

legs. Adjust the integrated frames

and lock the adjuster.

• The side can now be pegged or

rolled back to the trailer.

IMPORTANT: make sure the

elastic flap is covering the

zipper.