Acer Veriton Z6610G Kullanıcı Kılavuzu - Sayfa 4
Masaüstü Acer Veriton Z6610G için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Acer Veriton Z6610G 38 sayfaları. Acer veriton l4610g: user guide
Sayfayı Yazdır
iv
Do not overload a power outlet, strip or receptacle by plugging in too
•
many devices. The overall system load must not exceed 80% of the branch
circuit rating. If power strips are used, the load should not exceed 80% of
the power strip's input rating.
This product's AC adapter is equipped with a three-wire grounded plug.
•
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
Warning! The grounding pin is a safety feature. Using a power
outlet that is not properly grounded may result in electric shock
and/or injury.
Note: The grounding pin also provides good protection from
unexpected noise produced by other nearby electrical devices that
may interfere with the performance of this product.
Use the product only with the supplied power supply cord set. If you need
•
to replace the power cord set, make sure that the new power cord meets
the following requirements: detachable type, UL listed/CSA certified, VDE
approved or its equivalent, 4.6 meters (15 feet) maximum length.
Product servicing
Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service
personnel when:
The power cord or plug is damaged, cut or frayed.
•
Liquid was spilled into the product.
•
The product was exposed to rain or water.
•
The product has been dropped or the case has been damaged.
•
The product exhibits a distinct change in performance, indicating a need
•
for service.
The product does not operate normally after following the operating
•
instructions.
Note: Adjust only those controls that are covered by the operating
instructions, since improper adjustment of other controls may
result in damage and will often require extensive work by a
qualified technician to restore the product to normal condition.