Follett Horizon Chewblet 1010 Series Kurulum Talimatları Kılavuzu - Sayfa 6
Buz Yapıcı Follett Horizon Chewblet 1010 Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Follett Horizon Chewblet 1010 Series 17 sayfaları. Models with ride technology
Sayfayı Yazdır
Prepare the dispenser.
2.1
3.1
Bin Signal Installation
• Mount the electrical box to the side of the Vision dispenser
Note: If a 4 x 4 box is mounted to a non-grounded surface, connect ground wire at an
appropriate ground.
• Connect the bin signal plug on the electrical box to the bin signal cord on the bin
• Insert 16" (609,6 mm) of the long bin signal cable
docking station
➍
• After sliding the ice machine module into the louvered docking station, disconnect one wire from
shuttle switch and replace with wire from adapter plug.
• Connect wire removed from shuttle switch to male connector on adapter plug wire.
• Complete normal installation procedure for the ice machine using the installation manual that
shipped with the ice machine.
• Connect adapter plug into bin signal plug.
6
➎
➌
24"
(610 mm)
and secure in place with strain relief provided.
Dispenser preparation
➏
➊
to establish a ground connection.
➌
into the hole in the back of the louvered
➎
➐
VISION • RIDE Technology
self-contained
➐
➋
Ground
➊
➌
➋
➏
3