Advanced MxPro4 Series Manuel - Sayfa 8

Yangın Alarmları Advanced MxPro4 Series için çevrimiçi göz atın veya pdf Manuel indirin. Advanced MxPro4 Series 12 sayfaları. Sounder booster
Ayrıca Advanced MxPro4 Series için: Kurulum Sayfası ve Hızlı Referans Kılavuzu (4 sayfalar), Manuel (6 sayfalar)

Sayfayı Yazdır

3.1.2 Multiple Zones / Detailed Fire Information

If there are multiple zones in fire, it is possible to scroll through each zone by pressing the  keys. The top of the

display will then list each zone in a fire condition. For example:

Zone

0001

0057

0082

If more, detailed information is required on the source of the fire, scrolling right ( key) will give detailed

information on the fires within the zone. For each detector in fire the following information is available: -



Device location text



Loop number



Address number



Device Type



Detector Analogue/Digital value



Building Sector and Network Node address

Pressing the Esc key terminates this mode. It will also automatically terminate and revert to showing the fire origin

if the keys are not used for 15s.

3.1.3 Faults, Alarms and Disablements

A summary of all faults, alarms and disablements present is shown at the bottom of the screen. For example:

3 Zone With Disablements

Scrolling to the right will give more, detailed information.

If a new event occurs, a full description of the detector and the nature of the event is shown at the top of the

screen. For example:

SERVICE BLOCK PLANT ROOM

GENERATOR SWITCHGEAR

1 Zone In Alarm

3 Zone With Disablements

3.1.4 Normal Operation

Under normal operating conditions, the terminal will simply state "Normal System Operation".

3.2 Manual Display Mode

In addition to the automatic display functions described above, the terminal supports a full range of manually

selectable operations, including viewing, testing, disabling, enabling detectors etc. All these are accessed by

pressing the "Menu" key. For further details, refer to the MX-4000 Series User manual (Document No. 680-015).

Note that the display will revert to the automatic display mode if no key has been pressed in the last 60s (or 15s if a

fire is present).

FIRE-LOCATION

SOUTH WING GROUND FLOOR

SOUTH WING FIRST FLOOR

SERVICE BLOCK PLANT ROOM

ZONE 0001

More >

PRE-ALARM

(TEMPERATURE)

More >