Follett Horizon Elite Chewblet HCD1010NBT Manuel - Sayfa 7
Buz Yapıcı Follett Horizon Elite Chewblet HCD1010NBT için çevrimiçi göz atın veya pdf Manuel indirin. Follett Horizon Elite Chewblet HCD1010NBT 8 sayfaları. For ice storage bin top-mount applications
Ayrıca Follett Horizon Elite Chewblet HCD1010NBT için: Kurulum Talimatları Kılavuzu (13 sayfalar), Manuel (8 sayfalar)
Sayfayı Yazdır
5 – Horizon Elite ice tube runs - specifier guidelines
Long tube runs for RIDE remote ice delivery equipment
beverage
dispenser
minimum of
6.00" (15.24 cm)
turn/corner
ice transport tube –
1 3/16" OD,
2 1/8" OD with insulation
Remote condensing unit
Condensing unit installation specifications
Important specifier notes
1. Provide front, back and side clearances
as shown.
2. The maximum refrigerant line run length is
100' (30.5 m). Installations require 13-15 lb
of refrigerant depending on the line run.
3. The maximum line rise above the evaporator
is 35' (10.7 m). Condensing unit above
evaporator unit – 35' (10.7 m) (installations
with rise over 20' (6.1 m) require additional
suction line s-trap at midpoint rise).
4. The evaporator can only be mounted
a maximum of 15' (4.6 m) above the
condensing unit.
Note: The service loop is not included
when calculating length, rise or drop in the
tubing run.
Note: To connect evaporator/ice machine to rack systems, see page 3.
Remote 1010, 1410 series ice machine
support
maximum
straps
2' (60.9 cm)
radius
transport tube slope
(toward ice machine)
1/4"
1'
(2 cm per meter)
wall-mounted
ice machine
=
24.00"
(61.0 cm)
48.00"
(121.9 cm)
Important specifier notes
1. 75' (22.8 m) maximum ice transport
tube run.
2. Tubing routing bends must have a
6.00" (15.24 cm) radius or larger.
3. Dips and traps are not allowed. If not
supported from underneath, secure
insulated ice transport tube at least
every 2' (60.9 cm) to prevent drips
and traps.
4. Relative humidity levels above 80%
in areas where the ice machine or ice
transport tube is located may produce
excessive condensation that will cause
water damage.
5. Contact factory for recommendations
on running tubing through a decorative
soffit or chase.
air in
48.00"
(121.9 cm)
24.00"
(61.0 cm)
7
Form# 7035