Follett Horizon Elite HCC1410AVS Kurulum Talimatları Kılavuzu - Sayfa 6
Buz Yapıcı Follett Horizon Elite HCC1410AVS için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Follett Horizon Elite HCC1410AVS 17 sayfaları. Self-contained chewblet ice machine
Ayrıca Follett Horizon Elite HCC1410AVS için: Manuel (8 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar)
Sayfayı Yazdır
Prepare the dispenser.
2.1
3.1
Bin Signal Installation
• Mount the electrical box to the side of the Vision dispenser
Note: If a 4 x 4 box is mounted to a non-grounded surface, connect ground wire at an
appropriate ground.
• Connect the bin signal plug on the electrical box to the bin signal cord on the bin
• Insert 16" (609,6 mm) of the long bin signal cable
docking station
➍
• After sliding the ice machine module into the louvered docking station, disconnect one wire from
shuttle switch and replace with wire from adapter plug.
• Connect wire removed from shuttle switch to male connector on adapter plug wire.
• Complete normal installation procedure for the ice machine using the installation manual that
shipped with the ice machine.
• Connect adapter plug into bin signal plug.
6
➎
➌
24"
(610 mm)
and secure in place with strain relief provided.
Dispenser preparation
➏
➊
to establish a ground connection.
➌
into the hole in the back of the louvered
➎
➐
VISION • RIDE Technology
self-contained
➐
➋
Ground
➊
➌
➋
➏
3