Caraudio-Systems usbLOGiC USB-MK-CD Manuel - Sayfa 10
Otomobil Elektroniği Caraudio-Systems usbLOGiC USB-MK-CD için çevrimiçi göz atın veya pdf Manuel indirin. Caraudio-Systems usbLOGiC USB-MK-CD 19 sayfaları. Usb-av-player for bmw professional navigation systems without idrive
Sayfayı Yazdır
3.3.3. Radio module with Quadlock connector WITHOUT factory CD-changer
Installation is analogue to system with factory CD-changer. Only there is no female 12pin
connector on the vehicle harness. The male 12pin connector of harness C3C-BMW701 is not
used and should be isolated.
3.3.4. Radio module with round-pin connector WITH factory CD-changer
Disconnect the audio cable
from harness C3C-BMW701
and remove pins from female
and male 12pin connector.
Loosen the female round-pin connector from the radio
module. Loosen the female 10pin CD-changer connector
of vehicle harness of the female round-pin connector.
Pin the female pins of the audio cable of harness
C3C-BMW701into the female 10pin CD-changer connector
and connect the corresponding female pins of the vehicle
harness to the male pins of the audio cable of harness
C3C-BMW701. Make sure to isolate all connections.
Use following assignments:
Interface Audio-cable
10pinconnector
Red
White
Black
Connect female 10pin CD-changer connector into female round-pin connector and female
round-pin connector back to the radio module.
Version 10.05.2012
Pin to female
Pin 2
Pin 1
Pin 6
CD-changer
Soundsystem
USB-MK-CD