Amplitec C10 Series Kullanıcı Kılavuzu - Sayfa 11

Tekrarlayıcı Amplitec C10 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amplitec C10 Series 17 sayfaları. Standard wide band repeater
Ayrıca Amplitec C10 Series için: Kullanıcı Kılavuzu (8 sayfalar)

Sayfayı Yazdır

1. Product Descriptions
2. Electrical Specification
3. Installation
4. Connection
5. Performance Setting

component 1

Installation Steps:

1 :Use percussion drill to make four Φ6 holes on the wall according to above hole diagram,

fasten component 1 onto the wall.

2: Put the component 2 into component 1

4.3 Connection

Connection of RF cable

Input Port: put the antenna outdoor, and try to put on the place where there is strong signal,

then connect one adapter to BTS of equipment and assure good connection.

Power supply connection

Please use three-pin plug to assure good grounding

Chapter 5

Repeaters

Installation step 3

Repeater setting

User Manual of

C20-GSM

component 2