Advanced Ansi 9206C-LE Kullanıcı Talimat Kılavuzu - Sayfa 2

Güvenlik Ekipmanları Advanced Ansi 9206C-LE için çevrimiçi göz atın veya pdf Kullanıcı Talimat Kılavuzu indirin. Advanced Ansi 9206C-LE 11 sayfaları. Shock absorbing lanyard

Sayfayı Yazdır

Do not skip this instruction manual. Read the instruction manual carefully before using the equipment. If failed in

doing so it may cause serious injury or Death.

Advanced Safety Solutions Inc.

This manual must be read and understood in its entirety and used as part of fall protection training program as required by

OSHA or any state regularity agency. These instructions are intended to meet the manufacturer instructions as required by

ANSI/ASSE Z359.13. The user must fully understand the proper equipment use and limitations.

THE INSTRUCTIONS APPLY TO THE FOLLOWING MODELS:

Shock Absorbing Leading Edge Cable Lanyard

SPECIALITY LANYARDS:

A. Leading Edge Lanyards: These type of lanyards particularly meant for providing leading edge protection to the user when

working horizontally near sharp edges specially on terraces, roof tops etc. The models enlisted under it are as follow:

9206C-LE

WARNING: T his product is part of a personal restraint, work positioning, suspension, or rescue system. The user must read

and follow the manufacturer's instructions for each component or part of the complete system. These instructions must be

provided to the user of this equipment. The user must read and understand these instructions or have them explained to

them before using this equipment. Manufacturer's instructions must be followed for proper use and maintenance of this

product. Alterations or misuse of this product or failure to follow instructions may result in serious injury or death.

1.0 SPECIFIC INSTRUCTIONS :

1.1 Purpose: KARAM lanyards are to be used as part of a personal restraint, work positioning, suspension, or rescue

system. The D-ring extension assembly may also be used as part of a personal fall arrest system only if it is attached to

a self-retracting lifeline or an energy absorbing lanyard. Applications include: inspection work, construction,

demolition, maintenance, oil production, and conned space rescue.

1.2 Maximum Arrest force and Maximum Elongation/Maximum Deployment distance of personal energy absorber when

dynamically tested in accordance with the requirements of ANSI Z359.13 are as follows-

Conditioning:

Personal Energy Absorbers

6 ft Free Fall

Max Arrest Force

Average Arrest Force

Max Elongation

12 ft Free Fall

Max Arrest Force

Average Arrest Force

Max Elongation

304, County Park Road, Avella, Pa 15312.

Figure 1 - Product

Ambient Dry

Ambient Wet

<=1800 lbs-f

<=900 lbs-f

<=1125 lbs-f

48 inches

<=1800 lbs-f

<=1350 lbs-f

<=1575 lbs-f

60 inches

9206C-LE

Cold Dry

<=1800 lbs-f

<=1125 lbs-f

48 inches

<=1800 lbs-f

<=1575 lbs-f

60 inches

for 12 ft free fall

Hot Dry

<=1800 lbs-f

<=1125 lbs-f

48 inches

<=1800 lbs-f

<=1575 lbs-f

60 inches