Amplitec C20L Series Kullanıcı Kılavuzu - Sayfa 10
Genişletici Amplitec C20L Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amplitec C20L Series 13 sayfaları.
3) Put the expansion pipes(size: 8mm) into the 4 drilled holes.
4) As shown in the figure, align the fixing holes of the U-shaped back holder with corresponding holes
on the wall, and drive 4 M6*40 screws into the expand plugs with screwdriver and fasten the repeater
firmly.
Antenna Connections
Select suitable outdoor antenna and indoor antenna, according to the characteristic of the coverage
area. Installation and connection of outdoor antenna and indoor antenna should follow the requirements
as following:
1)The outdoor antenna should be installed at the place with the strongest signal and towards
BTS.
2)The length of cable, which connect the outdoor antenna and the booster, should less than be 20
meters.
3)Wrap the waterproof tape around the connection between outdoor antenna and outdoor cable.
4)The indoor antenna should be 5m away from the outdoor antenna in height, and can't towards
outdoor antenna.
5)It will be better if there can be a wall between outdoor and indoor antenna.
6)Outdoor antenna should connect to BTS port of the signal booster and indoor antenna to the
MS port
9