AmpliVox TITAN Kullanıcı Kılavuzu - Sayfa 7

Konuşmacılar AmpliVox TITAN için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AmpliVox TITAN 8 sayfaları. Wireless portable pa

Sayfayı Yazdır

Instructions on Changing Main Unit Battery

Refer to instructions and diagram below for changing batteries.

1. Please switch power off before changing the batteries.

2. Remove the 4 screws on the battery covers and remove batteries plates from

main panel board and take old batteries out. Install the new batteries 12V/4.5A

into battery compartment.

3. Make sure each battery is properly inserted. Then:

Connect red line into Positive R1 Red Line Terminal

Connect black line into Negative B2 Black Line Terminal

Connect Negative B2 Black Line Terminal to Gathered Negative B1

Connect Negative B1 Black to Positive R2 Red.

Note: Make sure the pole matches the color.

4. Then reattach the battery covers with four screws that were removed at the

beginning of the procedure.

Attaching battery incorrectly may result in battery fl uid

Expulsion, corrosion, and possibly injury. Please call for

technical assistance if needed. (800-267-5486)

Amplivox Sound Systems

- Call 800-267-5486 for assistance - www.ampli.com for support and registration-

Warning

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guar-

antee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment to an outlet on a circuit diff erent from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, any changes or modifi cations not

expressly approved by the party responsible for compliance could void the

user's authority to operate this equipment. (Example use only shielded interface

cables when connecting to computer or peripheral devices).

Explanation Of Graphical Symbols

The lightning fl ash with arrowhead symbol, within an equilateral triangle, is

Intended to alert the user to the presence of uninsulated dangerous voltage

within the products enclosure that may be of suffi cient magnitude to

constitute a risk of electric shock to humans.

The exclamation point, within an equilateral triangle, is intended to alert the

user to the presence of important operating and maintenance(servicing)

instructions in the literature accompanying the appliance.

10/30/2009

Amplivox Sound Systems

Warnings

CAUTION :To reduce the risk of electric shock, do not

remove the cover, No user serviceable parts inside. Refer

servicing to qualifi ed personnel. Exception: Battery may

be changed by user if correct procedure is followed.

WARNING: To prevent fi re or electric shock, do not

expose this equipment to rain or moisture.

- Call 800-267-5486 for assistance - www.ampli.com for support and registration-

10/30/2009