Comcast machineQ mQHub Kullanıcı Kılavuzu - Sayfa 10

Ağ Geçidi Comcast machineQ mQHub için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Comcast machineQ mQHub 13 sayfaları.

Checking the Gateway's Status

After your gateway is set up, you can see its status in mQCentral.

1. Log in to mQCentral and click Gateways.

2. The Connection State field will contain CNX if the gateway is connected and receiving data.

There is a WPS button located on the side of the gateway if you choose to use WPS to connect the

gateway to your Wi-Fi router.

You can reset the Wi-Fi network by holding the reset button in for three seconds using a paperclip or

small instrument. The reset button will put it back the gateway back into access point mode which will

then allow you to reconfigure your gateway Wi-Fi network using the above instructions.

If you have any questions, contact Support.