Comcast XFINITY Kullanıcı Kılavuzu - Sayfa 5

Ağ Geçidi Comcast XFINITY için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Comcast XFINITY 12 sayfaları. Wireless gateway
Ayrıca Comcast XFINITY için: Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (8 sayfalar), Manuel (1 sayfalar), Kurulum Talimatları (2 sayfalar), Manuel (16 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Kurulum Kılavuzu (2 sayfalar)

Comcast XFINITY Kullanıcı Kılavuzu
If you need additional support, go to comcast.com/digitalnow or call 1-888-634-4434.
XDTA OOBE SIK 1010.indd 5

Troubleshooting

If the remote control does not work:
• Make sure the batteries are inserted correctly.
• Make sure your remote can "see" the front of the DTA (or the front of the
Remote Control Signal Receiver).
• If you are using the Remote Control Signal Receiver, make sure it is
connected firmly to the DTA.
If there is no light illuminated on the front of the DTA:
• Make sure the power cord is attached to the DTA and plugged into a live
electrical outlet.
If there is no picture on the TV and the light on the DTA is
blinking:
• Make sure you have contacted Comcast to activate the DTA.
• Wait a few minutes. If the light is still blinking, call Comcast at 1-888-634-
4434.
If there is no picture on the TV and the light on the DTA is
solid:
• Make sure the TV and DTA are both set to the same channel (both 3, or
both 4).
• Try switching the TV and DTA to other channel (3 or 4).
• If you're also connected to a VCR, make sure the VCR is turned on.
• Make sure the DTA is connected directly to the cable wall outlet.
• Make sure all the cables are firmly connected.
If the audio is in a language you don't expect to hear:
• You may have accidently changed it to an alternate language option. Press
the LANG button on your remote control one or two times.
5
9/30/10 3:03 PM