Comcast XFINITY SMC-D3GNV Manuel - Sayfa 2

Ağ Geçidi Comcast XFINITY SMC-D3GNV için çevrimiçi göz atın veya pdf Manuel indirin. Comcast XFINITY SMC-D3GNV 2 sayfaları. Wireless network connection and troubleshooting tips
Ayrıca Comcast XFINITY SMC-D3GNV için: Kablosuz Ağ Bağlantısı ve Sorun Giderme İpuçları (8 sayfalar)

Sayfayı Yazdır

Wireless Gateway Placement

For best WiFi coverage, try to place your XFINITY Wireless Gateway in a

location in the center of your home, elevated off the floor.

For best WiFi reception, try to avoid placing your Wireless Gateway:

• Against a wall

• Behind furniture

• On or between metal surfaces

• Close to halogen/fluorescent lighting

• Near microwave or other appliances

• Near windows

• Tucked away in the corner of a room

To learn more about your Wireless Gateway, visit www.xfinity.com/

internethelp.

ENG_WGXB2_0714.indd 4-6

Connect WiFi Devices

Manual Wireless Connection

If your computer or laptop does not support WiFi Protected Setup (WPS),

or if you'd prefer to connect manually, follow these easy steps to join your

wireless network and access the Internet from anywhere in your house.

1. On the bottom or side panels of your Wireless Gateway, find the

default Network Name (SSID) and the Network Password.

2. Write down your wireless network information for future reference.

3. Go to the WiFi Settings on your WiFi device and ensure WiFi is turned

on. Directions to access the WiFi settings for popular operating

systems are below. If your operating system is not listed, refer to the

manufacturer's guides.

Windows

On your Windows

Desktop, click the

Wireless Network icon.

Apple Mac OS X

On your Mac

Desktop, click the

WiFi icon.

Android

From the Apps screen, tap the Settings

icon. Tap Wireless & Networks, then

WiFi Settings.

For more information about your Wireless Gateway, visit www.xfinity.com/internethelp.

Apple iOS (iPad, iPhone, iPod Touch...)

From the Home Screen, tap the Settings

icon. Tap the WiFi icon.

4. Under the WiFi settings, the list of available networks should appear.

Select your home network (such as Home-XXXX) from Step 1.

5. When prompted, enter the case-sensitive Network Password from

Step 1. Tap the confirmation button—usually labeled Join, Connect,

or OK.

6. If your WiFi device is connected, you should see a check mark (or

other indication) next to the Network Name (SSID) you had selected.

7. Open a web browser (i.e. Internet Explorer, Chrome, Safari, Firefox),

and try to access a site, such as www.xfinity.com.

Push Button Method for Devices with WPS

(WiFi Protected Setup) Button

If you are unsure if your computer supports WPS, check for the WPS label:

If you cannot find it, your computer most likely does not support WPS

(refer to the "Manual Wireless Connection" section). If your computer

does support WPS, here's what to do:

1. Press the WPS button on your computer. If your computer does not

have a WPS button, refer to your computer's user guide for more

instructions.

2. Within two minutes, press the WPS button located on the top of your

Wireless Gateway.

3. A message will appear when the connection is successful. If the

connection is not successful, please wait a few minutes before

trying again.

For more information about your Wireless Gateway, visit www.xfinity.com/internethelp.

6/17/14 3:33 PM