1byone O00QH-0013 Kullanım Kılavuzu - Sayfa 3
Aksesuarlar 1byone O00QH-0013 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. 1byone O00QH-0013 8 sayfaları.
Sayfayı YazdırParameters:
Voltage of receiver
DC 3V (2 x AA batteries)
Voltage of push button
DC 3V (CR2032 battery)
Frequency
433.92MHz+100KHz
Operating range
100m/300ft (without obstacles)
Power consumption:
Receiver: ＜0.3W
Push button: ＜10mA
Receiver's ring volume
Over 85dB within 0.5m/1.64ft
Working temperature
-20℃~50℃
3. Power Supply:
Receiver: The receiver is powered by 2 x AA
batteries. Please insert the batteries using the
following procedure:
a) Press the buckle on the battery compartment
cover and remove the battery compartment
cover at the back of the receiver.
b) Insert the 2 x AA batteries using the correct
polarity to eliminate the danger of fire.
c) Reattach the battery compartment cover.
Push button: The push button is powered by a 3V
battery (Type: CR2032). Please insert the battery
using the following procedure:
- 03 -
a) Insert a screwdriver into the small access port
at the bottom of the push button and
remove the push button's back cover.
b) Insert the 3V battery (type CR2032) into the
battery compartment, making sure the
battery surface marked with a "+" is facing
upwards.
c) Reinsert the back cover, making sure it is
securely closed to ensure IP protection.
Note:
If the performance of the push button deteriorates
or completely stops, the battery might be
exhausted. Please replace with another 3V type
CR2032 battery.
Weak batteries can greatly reduce the ringtone
volume of the receiver, please change the
batteries very 8-10 months.
4. Operation:
A. Selecting the notification mode:
The doorbell receiver can notify after the push
button has been pressed by playing a ringing
sound, flashing an LED, or ringing and flashing
- 04 -