Comco WS6000 Series Çalıştırma ve Servis Talimatları Kılavuzu - Sayfa 2

Masaüstü Comco WS6000 Series için çevrimiçi göz atın veya pdf Çalıştırma ve Servis Talimatları Kılavuzu indirin. Comco WS6000 Series 6 sayfaları. Micro-abrasive blasting workstations

Sayfayı Yazdır

Micro-Abrasive Blasting Workstations

The Comco WS2200 and WS6000 series WorkStations are designed for use with all Comco

series micro-abrasive blasters. Each workstation provides a generous work chamber

illuminated by two fluorescent tubes. The work chamber has a large tempered glass viewing

window that is hinged to facilitate loading and unloading of parts. Two 5" arm holes with

flexible rubber iris baffles permit access so that an operator may hold work with one hand

and a nozzle handpiece with the other. The workstation has a 4" dust exhaust connection at

the rear so that a high capacity dust collection unit may be used to keep the abrasive dust

completely controlled.

The Comco WS2200 and WS6000 WorkStations are designed to work as part of a micro-

abrasive blasting system consisting of the following:

1. The workstation

2. Pressurized air (gas)

3. An air filter-dryer

4. A dust collection unit

5. A micro-abrasive blaster (AccuFlo

Micro-Abrasive Blaster

The micro-abrasive blaster is the heart of the blasting system. The manual that

comes with your blaster will cover in detail the system requirements and operation.

Refer to that manual for more information regarding preparation, set-up, operation

and maintenance of your micro-abrasive blasting system.

Dust Collection Unit

An industrial type dust collector is necessary to provide adequate air flow to

evacuate spent abrasive particles from the workstation. Typically the dust collector

should be capable of providing 350 to 500 scfm of air flow through the workstation. If

the dust collection unit delivers lower volumes of air, it will not be able to remove the

heavier, coarser abrasives and will diminish the operator's visibility in the workstation.

The Comco Warranty

Comco warrants that the workstation will be free from all defects in material and

workmanship under normal use for a period of one year from the date of purchase or 2,000

hours of normal operation, whichever comes first. Contact Comco Inc. for complete details

and exclusions regarding this warranty.

Comco Inc.

Operation and Service

. MicroBlaster

Page 2

, PowerFlo

, or DirectFlo™)

Issue Date: July 2016