Ampro TECSHOW QUAD SPIDER 60 Kullanıcı Kılavuzu - Sayfa 5
DJ Ekipmanları Ampro TECSHOW QUAD SPIDER 60 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ampro TECSHOW QUAD SPIDER 60 9 sayfaları. Moving led effect
Sayfayı Yazdır
channel mode will be displayed.
2. Press the UP or DOWN buttons to find your
desired DMX channel and press ENTER con
confirm and exit.
SLND - This will let you set unit as a master or
slave in a master/slave configuration.
1. Press the MENU button until "SLND" is
displayed, press ENTER. Either "MAST", "SL 1",
or "SL 2" will be displayed.
2. Press the UP or DOWN buttons until your
desired setting is displayed, press ENTER to
confirm.
NOTE: In a Master/Slave configuration you can set
one fixture to Master and then set the next fixture to
"SL 2", the fixtures will now have contrast movement
to each other.
SHND - Show modes 0-15 (Factory programs).
Show mode can run with or without sound
active mode active.
1. Press the MENU button until "SHND" is
displayed, press ENTER.
2. "Sh X" will now be displayed, "X" representing
a number between 0-15. Shows 1-15 are factory
programs, while show "0" is random mode. Use
the UP or DOWN buttons to find your desired
show.
3. When you have found your desired show press
ENTER, then press and hold the MENU button
for at least 3 seconds to activate. After you have
set your desired show, it can be changed at any
time using the UP or DOWN buttons.
AUTO- auto run mode.
1. Press the MENU button until "AUTO" is
displayed, press ENTER.
SOUN - Sound Active mode.
1. Press the MENU button until "SOUN" is
displayed, press ENTER.
2. The display will show either "ON" or "OFF".
Press the UP or DOWN buttons to select "ON"
to activate sound active mode, or "OFF" to
deactivate sound active mode.
3. Press ENTER to confirm.
SENS - In this mode you can adjust the sound
sensitivity.
1. Press the MENU button until "SENS" is
displayed, press ENTER.
2. A number between 0-100 will be displayed.
Press the UP or DOWN buttons to adjust the
sound sensitivity. 0 being the least sensitive,
and 100 being the most sensitive.
3. When you have found your desired setting press
ENTER to confirm.
PINT- With this function you can choose positive
direction or reverse direction of Tilt 1. This
option is used to reverse the Tilt 1 direction.
1. Press the MENU button until "PINT" is
displayed, press ENTER.
2. Press the "YES" or "NO" button to select
reverse or not reverse , choose "Yes" means
direction of Tilt1, choose "No" means negative
direction of Tilt1,
3. When you have found your desired setting press
ENTER to confirm.
TINT - With this function you can choose positive
direction or reverse direction of Tilt 2.
1. Press the MENU button until "TINT" is
displayed, press ENTER.
2. Press the "YES" or "NO" button to select
reverse or not reverse , choose "Yes" means
direction of Tilt2, choose "No" means negative
direction of Tilt2.
3. When you have found your desired setting press
ENTER to confirm
LED - With this function you can have the LED
display turn off after 5 seconds.
1. Press the MENU button until "LED" is displayed,
press ENTER.
2. The display will show either "ON" or "OFF".
Press the UP or DOWN buttons to select "ON" to
keep the LED display on at all times, or "OFF" to
English version
| Tecshow Quad Spider 60
P. 5