Follett FZR4-ADA Kurulum, Çalıştırma ve Servis Kılavuzu - Sayfa 4
Dondurucu Follett FZR4-ADA için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Servis Kılavuzu indirin. Follett FZR4-ADA 20 sayfaları. Undercounter freezer
Ayrıca Follett FZR4-ADA için: Kurulum, Çalıştırma ve Servis Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Installation
Installing legs – required
1.
Remove legs from plastic bag packed inside freezer.
2.
Tip freezer back and screw legs in all the way to stop (they will extend 1/8"
(3.175mm) below base of freezer).
3. Adjust legs as needed to level freezer in both directions. To access legs,
remove the lower front panel. Turn legs clockwise to extend legs.
Installation shelves – required
1.
Remove shelves and shelf brackets packed inside freezer.
2. Install shelf brackets in pilasters (insert top tab, squeeze and push in lower
tab).
Changing temperature controller settings – optional
Follett's temperature controller is pre-programmed with a -25 C (-13 F) set point
and degrees C display. The -25 C (-13 F) set point delivers a temperature range
of -23 to -25 C (-9 to -13 F).
Follett's controller set point can be changed to deliver up to a -15 C (+5 F)
temperature for applications where a lower temperature is not desired (i.e. ice
cream). See page 6 to change controller settings.
4
Installation
Fig. 1
Fig. 2
2
1
Fig. 3
FZR Series 00939124R00
3