Follett FZR5 Kurulum, Çalıştırma ve Servis Kılavuzu - Sayfa 6
Dondurucu Follett FZR5 için çevrimiçi göz atın veya pdf Kurulum, Çalıştırma ve Servis Kılavuzu indirin. Follett FZR5 20 sayfaları. Undercounter freezer
Ayrıca Follett FZR5 için: Kurulum, Çalıştırma ve Servis Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Changing Temperature Display - Optional
NOTICE!
It is important that you review the temperature cut-out settings
after you change the temperature display. The controller contains
two separate temperature channels; F and C. Changes made
to the factory default settings while displaying temperatures
in F will not automatically transfer when you change the
temperature display to C.
Follett freezers are factory-set to display temperatures in degrees C
(Celsius). To display the temperature in degrees F (Fahrenheit), follow
these steps:
1. Move the power switch to OFF and unplug the freezer.
2. Remove the front lower panel cover (Fig. 7) to access the
controller.
3. Locate jumper wires connecting pins #9 and #11 (Fig. 8) and
disconnect.
4. Reinstall the front lower panel cover.
5. Plug in the freezer and return the power switch to ON.
"Sleep" Function –––––––––––––––––––––––––––––––––––––––––––––––––––
You may not want the Follett temperature display when using a third-party temperature monitoring system with
its own temperature display. You can put the Follett controller "to sleep" to avoid confusion. The compressor icon
remains illuminated when the compressor is running.
1. Press BOTTOM RIGHT button to put display to sleep.
2. Press BOTTOM RIGHT button to return to display mode.
6
FZR Undercounter Freezer
Fig. 7
Fig. 8
C/F Jumper Wire
1
2
3
4
5
6 7
8
programming key
Probe
9 10 11 12
11 12
!
•
•
•
•
•
Controller
(accessory)