Follett 15 Series Kurulum Kılavuzu - Sayfa 10

Dağıtıcı Follett 15 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Follett 15 Series 20 sayfaları. Ice and water dispenser

Freestanding Installation

1. A clearance of at least 3" (7.6 cm) is required behind and on each

side of the dispenser for electrical connection and ventilation

(Fig. 4).

2. Rough-in the electrical service and water line.

§ Electrical: 115 V, single phase, 15A receptacle required. The dispenser

has an integral 8 ft (2.4 m) cord and plug.

§ Water: supply line (with shut-off valve) connects to the dispenser's

1/4" MPT inlet or John Guest push-in fitting.

3. If installing optional 6" Leg Accessory (item# 00956318), tilt or lay

base stand on side and screw each leg into stand (Fig. 8).

4. Remove four plastic, thread-protecting plugs from bottom of

dispenser.

5. Attach dispenser to base stand with supplied hardware (Fig. 5).

NOTICE!

If installing optional Drip Tray Drain Kit, refer to instructions

included with the Drip Tray Drain Kit.

Dispenser and Ice Machine - 115 V, 230 V, 220 V

Fig. 3

freestanding models

minimum 3" (7.6 cm)

clearance required

Fig. 4

Fig. 5