Amprobe AM-420 Kullanıcı Kılavuzu - Sayfa 8

Multimetre Amprobe AM-420 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amprobe AM-420 16 sayfaları. Digital multimeter

• Do not apply more than the rated voltage, as marked on the Meter,

between the test probe or between any test probe and earth ground.

• Use the Meter with caution for voltages above 30 Vac rms, 42 Vac peak, or

60 Vdc. These voltages pose electrical shock hazards.

• Disconnect circuit power and discharge all high-voltage capacitors before

testing resistance, continuity and diode.

• Do not use the Meter around explosive gas or vapor.

• When using the test leads, keep your fingers behind the finger guards.

• Remove test leads from the Meter before opening the Meter's case.

• If the meter is used in a manner not specified in the users manual, the

protection provided by the equipment may be impaired.

• To avoid injury, when the "battery low" indicator is present in the display,

the product should NOT be used. A false measurement may occur. The

battery should be replaced immediately.

UNPACKING AND INSPECTION

Your shipping carton should include:

AM-420 Multimeter

9V alkaline battery (installed)

Users manual

If any of the items are damaged or missing, return the complete package to the

place of purchase for an exchange.

Residential digital multimeter to check for voltage in receptacles, electrical

circuits, fuses, light bulbs and electrical connections.

• Measurements: Voltage up to 250V AC/DC, DC Current and Resistance

• Special functions: Audible continuity and diode test

• Event: Data hold

• Low battery warning

• Safety: CAT II 250V

MAKING MEASUREMENT

X�

1. Use the proper function and range for measurements.

2. To avoid possible electrical shock, personal injury or damages to the Meter,

disconnect circuit power and discharge all high-voltage capacitors before

testing resistance, continuity and diode.

3. Connecting test leads:

• Connect the common (black) test lead to the circuit before connecting the

live lead;

• After measurement, remove live lead before removing the common

(black) test lead from the circuit

4. Over-range indication: "1", "-1", or maximum display reading.