Daihatsu EDM30ZII Kullanım Kılavuzu - Sayfa 9
Kapı açma sistemi Daihatsu EDM30ZII için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Daihatsu EDM30ZII 16 sayfaları. Microprocessor-controlled door operator
Sayfayı YazdırBattery open/close system coupled with
an electromagnetic
Four
combinations
BOLIZ,
BOL2Z,
BCLIZ,
Full-close/full-open
These
relays
provide
door
is fully
closed
signals
operate
indicators
4. Door Operation Principles
Conventional
electrically-driven
detect the door stroke or braking position with position sensor switches. The Daihatsu
Microprocessor-controlled
memorizes
it
as the door stroke. Based on this, the operator adjusts the braking position
and half-open position. This eliminates
manual of braking adjustments,
Operating principles
"
.. Teaching (determining door stroke)
About 3 seconds after the power switch is turned ON, the open door starts to close at low
a.
speed and finally presses against. the door frame to close completely.
closed when the power switch
ON.
the power
b.
Upon receipt
of the first ON signal
door to about 70% of the door stroke at high speed, then brakes it to low speed
until the door reaches
c.
After
the time preset
high speed, brakes
speed until the door closes completely.
This is one cycle of the door stroke
in memory.
This memory
2. Normal door operation
When the teaching process is completed,
in the normal manner.
lock
are possible:
and BCL2Z.
relay
check
signals
or fully
opened.
or buzzers.
door operators
Door Operator counts the number of pulses from the motor, and
etc.
of the Daihatsu Microprocessor-controlled
is turned on, the door is press-closed
the fully open position.
on the open timer has expired,
it just before
is cleared
1COV AC
100v AC
5V
when
the
These
FuI."P"". hAldow
_S'll
D.E
C.E
the necessity of position
from the sensor switch,
the fully closed position,
teaching
process.
every time the power switch
the door starts to operate
,
Conuol be.
a
OE
CE
1
~
Ful-opoo.
~a.c105.
r I ys
sensor switches and
Door Operator.
If the door is fully-
3 seconds
the Operator
the operator
closes
and runs it at low
Now the door stroke
is turned OFF.
mo""
DC
after
opens the
the door at
is stored