Amprobe SM-CAL1 Kullanıcı Kılavuzu - Sayfa 6

Test Ekipmanları Amprobe SM-CAL1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amprobe SM-CAL1 7 sayfaları. Sound meter calibrator

Sayfayı Yazdır

SPECIfICAtIoNS

general

Battery:

Low Battery indicator:

Battery Life:

enviromental:

Temperature and humidity

operation:

Storage:

dimension:

weight:

�

-eMC: en61326-1 This product complies with requirements of the

following european Community directives: 89/336/eeC (electromagnetic

Compatibility) and 73/23/eeC (Low Voltage) as amended by 93/68/eeC (Ce

Marking). however, electrical noise or intense electromagnetic fields in the

vicinity of the equipment may disturb the measurement circuit. Measuring

instruments will also respond to unwanted signals that may be present within

the measurement circuit. Users should exercise care and take appropriate

precautions to avoid misleading results when making measurements in the

presence of electronic interference.

Electrical (Sound)

Standard:

output Sound Level:

Accuracy:

output frequency:

MAINtENANCE ANd REPAIR

if there appears to be a malfunction during the operation of the meter, the

following steps should be performed in order to isolate the cause of the

problem.

Check the battery. Replace the battery immediately when the Led does

not come on.

Review the operating instructions for possible mistakes in operating

procedure.

except for the replacement of the battery, repair of the generator should be

performed only by a factory Authorized Service Center or by other qualified

instrument service personnel. The front panel and case can be cleaned with

9V, 006p or ieC 6f22 or nedA 1604.

Led will not be on when switched on.

Approx 20 hours. (Alkaline battery)

indoor operation; Altitude up to 2000

meters; Atmospheric pressure: 1013

mbar.

0 to 40°C (32 to 104°f), 10 to 70% Rh.

-10 to 60°C (14 to 140°f), 10 to 90% Rh.

48 x 125 mm (1.9 x 4.9 in.)

285g ( 0.6 lb.) including battery

AnSi S1.40-1984 and ieC942 1988 Class2.

94dB and 114dB re 20 upa under

reference.

± 0.5 dB.

1 khz ± 4 %.