Amprobe TMD-53 Kullanıcı Kılavuzu - Sayfa 13

Termometre Amprobe TMD-53 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amprobe TMD-53 20 sayfaları. Thermocouple thermometer k/j / wireless

Sayfayı Yazdır

the difference between the two thermocouples (T1-T2),

when the thermometer is turned on, it is set to T1.

"K/J" Main display Input Thermocouple Type

Select

The "K/J" key selects the T1 thermocouple type, when

the main display is showing T1. When the thermometer

is turned on, it is set to the type selected when the

thermometer was last turned off.

"MAX/MIN" With Time Record Mode

(only Main display)

Press "MAX/MIN" key to enter the MAX MIN Recording

mode, (displays the Maximum reading with time,

Minimum reading with time and Average reading stored

in record mode). In the this mode the automatic power-

off feature is disabled and "

" key, "°C/°F" key, "REL"

key, "SET" key, "Hi/Lo LIMITS" key and main display

"T1 T2 T1-T2" key, "K/J" key are disabled. The beeper

emits a tone when a new minimum or maximum value

is recorded.

Press "MAX/MIN" key to cycle through the MAX, MIN

and AVG readings. If an overload is recorded, the

averaging function is stopped. In this mode, press the

"HOLD" key to stop the recording of readings, all values

are held, press again to restart recording.

To prevent accidental loss of MAX, MIN and AVG data,

this mode can only be cancelled by pressing and holding

the "MAX/MIN" key for 2 seconds. All recorded readings

are erased.

"REL" Relative Mode (only Main display)

Press the "REL" key to enter the relative mode, zero the

display, and store the displayed Reading as a reference

value. REL is shown on the display. Press "REL" key

again to exit the relative mode. The relative reference