Amprobe GSD600 Kullanıcı Kılavuzu - Sayfa 8

Güvenlik Sensörleri Amprobe GSD600 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Amprobe GSD600 8 sayfaları. Gas leak detector

Sensor performance may be also affected if exposed to a high density gas for a long time

even when the meter is off.

when the meter is off for a long period of time, the sensor may show a drift in resistance

according to the storage environment. The meter should be stored in sealed bag with clean

air.

Note:

when the unit is not powered on for a long time, the warm-up time becomes longer for

stabilization.

Regardless of the powering state of the meter, if the meter is exposed to extreme condition

such as high humidity, extreme temperature, or high contamination levels for a long time,

the performance of the meter could be affected.

SpECIFICAtIoNS

Sensor: Semiconductor

Response time: < 10 seconds

Warm up time: < 60 seconds

operation temp. Range: -5°C ~ 45°C / 23°f ~ 113°f

Auto power off: 10 minutes after last key pressure.

power supply : (4) AA batteries; 9V power adaptor (plug specifications: outer diameter:3.5mm;

inner diameter: 1.35mm; Center positive, 500mA maximum).

Battery life: 14 hours (Continuous working)

Minimum BAt. voltage: 4.8V

probe length:

447 mm (17.6 inches)

Size: 175 x 70 x 38 mm (hxwxT)

Indicator: intermittent beep (Acoustic) / LeD (Visual)

Range

Methane

propane

Sensitivity

Advantage

Visit us at www.TestEquipmentDepot.com

Back to the Amprobe GD600

GSD600 Gas Leak Detector

40 to 640 ppm

35 to 580 ppm

35ppm (propane)

fast response & high Methane sensitivity