DPI 4342.8230 Manuel - Sayfa 3

Solunum Ürünleri DPI 4342.8230 için çevrimiçi göz atın veya pdf Manuel indirin. DPI 4342.8230 13 sayfaları.

SEKUR NAVY CAP is manufactured by:

Dispositivi Protezione Individuale D.P.I. srl

Via di Cervara, 42

00155 ROMA

ITALY

3. DESCRIPTION AND USE

The SEKUR CAP NAVY range of self-contained compressed air escape breathing apparatus

includes the nominal duration of 10 minutes and 15 minutes. The total weight of the equipment

(in the 10 and 15 minute versions) exceeds 5 kg. It is therefore not considered suitable (as

deﬁned in EN1146) to be carried by the user for an entire work shift.

The equipment is integrated into a chest carry bag with an adjustable shoulder strap. When the

zip of the carrying bag is opened, a locking pin is released, which automatically activates the

valve / pressure reducer. The pressure reducer ensures the maintenance of a constant average

pressure value, a pre-set nozzle provides, delivers a constant ﬂow of breathable air through a

connecting tube to the front of the lid. When the cylinder is running low and there is less than

one minute of autonomy remaining, an acoustic signal indicates the end of the nominal duration.

The SEKUR NAVY CAP range of equipment provides the user with escape breathing protection

from contaminated or oxygen deprived environments in hazardous situations. Safety warning:

the duration starts from the moment of activation of the air supply and not from the moment the

hood is put on. The time required to allow the user to escape to safety is less than or equal to the

stated capacity of the equipment. When choosing an escape device model and duration, it is

essential to consider any potential hazards, such as storage location and escape route.

Note: although the bag has antistatic characteristics as required by the reference standard,

the SNC device is not designed for use in potentially explosive atmospheres.

The equipment is available in two versions of 10 and 15 minutes and differs by the associated bottle. In

particular, the 2L steel bottles are used for a nominal duration of 10 minutes and the 3L steel bottles for a

nominal duration of 15 minutes.

greater than 35 l/min

5. PREPARATION FOR USE

5.1. PRELIMINARY CHECKS

- Check that the reading on the pressure gauge corresponds to the maximum ﬁlling pressure

of the cylinder (i.e. 200 bar). The needle of the pressure gauge must be within the green

section.

- Check that the seal of the bag closure is intact.