Ampt Analoger ADG-1 SE Kullanıcı Kılavuzu - Sayfa 7
Müzik Pedalı Ampt Analoger ADG-1 SE için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ampt Analoger ADG-1 SE 12 sayfaları.
Sayfayı YazdırElectrical Specifications: (subject to change)
Type: 100% Analog signal and control path
•
Power: 9VDC @ <150mA. 80-150mA typical. Up to 400mA
•
start up. Standard pedal center negative 2.1mm x 5.5mm barrel.
Bypass: Switchable true bypass or JFET-buffered bypass with
•
switchable tails
Expression / CV input: TRS input assignable to Time,
•
Feedback, Mod Rate or Mod Amount, (CV range is 0-5V). Ring
supplied current limited 5V output. Control input on Tip.
Feeback Insert: TRS input with send and return on jack.
•
Attenuated to -6dB below post drive level. Level dependent on
drive control.
Delay Time: <35ms – 1060ms Triple BBD mode, 17ms - 350ms
•
single bucket mode. 13ms – 1350ms with LFO or Control
Voltages
Input impedance: >1MΩ
•
Output impedance: 1KΩ Max (5k max for buffered bypass)
•
Max input level: +15dBµ (4.3V RMS)
•
Max output level: +14dBµ (3.9V RMS)
•
Maximum drive: >23dB (covers attenuation to gain)
•
Noise Reduction: 2:1 broadband with 12dB HF emphasis
•
Physical Specifications:
Genuine Hammond™ die-cast aluminum enclosure
•
Dimensions: D=4.95" (12.5 cm), W=3.75" (9.4 cm), H=2.25"
•
(5.8 cm)
Weight: 15.5oz (440g)
•
<7>