fomex flexible LED FL1200 Manuel - Sayfa 5

Aydınlatma Ekipmanları fomex flexible LED FL1200 için çevrimiçi göz atın veya pdf Manuel indirin. fomex flexible LED FL1200 10 sayfaları.

How to use Controller

How to use buttons

To Set LOCK Mode : 2~3 seconds press 'MODE

is set. (Note : when 'LOCK' mode is set, CCT and DIM can't be changed)

To Unlock : In 'LOCK' mode, when 2~3 seconds press 'ADJUST

display window and is released.

To Set QUICK Mode : Short-press 'MODE' button once, on the LCD display window 'QUICK' displays.

Press Q1▲ button to 3200K or Q2▼ button to 5600K (Default value). At this time, DIM and CCT can be adjusted.

How to adjust/set desired CCT value : In 'QUICK' mode, press 'ADJUST' button and CCT value is blinking. Please turn

CCT dial to select CCT value and press 'ADJUST' button to set.

Return to default condition : Press and hold Q1▲ button and press Q2 button.

To Turn QUICK Mode Off : In 'QUICK' mode, when press 'MODE' button once, 'QUICK' disappears from the LCD

display window. And 'QUICK' is released and transfer to DMX Address setting mode. (At this time, CCT is automati-

cally going back to the previous value used in normal mode.)

To Set DMX Address : Press 'MODE' button twice, on the LCD display window 'DMX' appears and address is

blinking. At this time, set DMX address using Q1▲/Q2▼ button. Please press 'ADJUST' button to save the address,

then it switches to normal mode. (Note : when it is connected with DMX console, DMX mode is automatically set

and the following is how to set DMX address. – Press 'MODE' button once. When address is blinking, please set the

address using Q1▲/Q2▼ button and press 'ADJUST' button to save the address.)

* Sequence of Mode Conversion ( Normal mode → QUICK mode → DMX address setting mode → Normal mode )

' button once, on the LCD display window 'LOCK' displays and

DETAIL

' button once, 'LOCK' disappears from the LCD