fomex HD1000 Kullanıcı Kılavuzu - Sayfa 6

Aydınlatma Ekipmanları fomex HD1000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. fomex HD1000 12 sayfaları. Hd series

Operation

1. When released from the factory, halogen control volume is in off position.

2. Fit the modeling lamp into the lighting.

3. After checking if modeling lamp control volume(MODEL) of control panel and output

control volume are at minimum position and if power switch is OFF, connect the power

cord to input socket.

4. Connect synchro cord to synchro socket.

5. Turn on the power button and power indicator lamp should come on

6. Control the brightness of modeling lamp with modeling lamp control volume.

7. Control the power with power control volume.

8. If you want to tune this with other lighting, turn on the slave button.

9. If you change the power from high to low, ready lamp might flicker. If so, discharge by

pressing ready button before using.

10. Sound lamp turns on when you press the sound button. Sound is generated according

to the change of power. If power is changed to lower power, it will start beeping. If you

press the ready button at this time, the sound stops.

Way of checking whether flash is charged when not using sound function.

During charging : Modeling lamp is OFF

Completion of charging : Modeling lamp is ON

HD SERIES