Cardax Prox Plus 125 Kurulum Notu - Sayfa 2

Kart Okuyucu Cardax Prox Plus 125 için çevrimiçi göz atın veya pdf Kurulum Notu indirin. Cardax Prox Plus 125 13 sayfaları.

Power Supply Requirements

The Prox Plus 125 reader requires a supply of 13.6 V DC +/- 15% at 200 mA.

Prox Plus 125 readers require a good quality linear power source.

Cabling

Use 4 core, 0.2 mm

120 pf/m. The maximum external diameter of the cable must not exceed 5mm (

The maximum distance between the URI and the Prox Plus 125 reader with this cable is

200m (650ft).

Note: Switch mode power supplies are not recommended as they may reduce the

read range of the Prox Plus 125 reader.

(AWG 24) cabling with a maximum, nominal capacitance of

Note: You need a special cable terminating tool to connect the building cabling to

the Prox Plus 125. The tool has a head (Part No. C861145) and handle (Part

No. C861115).

inch).

Part Number 3E1086 R2

September 2002