Fomis TYX-586 Hızlı Başlangıç Kılavuzu - Sayfa 4

Klavye Fomis TYX-586 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Fomis TYX-586 6 sayfaları. Xboxone keyboard 2.4g

Shenzhen Yuyuanxin Electronic Technology Co.,Ltd.

Usage guideline

1．Connect the power for XBOX ONE(S)console firstly then connect HDMI cable with

LCD equipment, open the XBOX ONE (S)console and the indicator will be on.

2.Connect the controller with XBOX ONE (S)console. (can refer to the host

specification)

3.For new controller it need to use the 3.5 audio jack to remove the silicone by arrow

direction at the bottom of the keyboard,then rotate 3.5 audio jack outward until it is

connected.

4.Aim two joint pin of the keyboard at XBOX (S)one directional hole, and its headset

jack at the bottom of XBOX ONE(S) controller. then push the keyboard into the XBOX

ONE(S)controller slowly and securely.

5.Under the connection status, insert the 2.4G receiver into any USB port of XBOX ONE

console,and enter the pairing key on the back of the XBOX ONE keyboard within 15

seconds.It will be automatically paired while the blue indicator will glitter.

(Note:when pairing,the distance between keyboard and receiver must be within 0.5

meters,if it fails, do above steps again.)

6.It pairs when the blue indicator will turn off, and can do regular work.

7.Pair only once between the XBOX ONE keyboard with 2.4G receiver. Open the

console to awake the controller automatically for further use.

8.Its XBOX ONE headset jack can be compatible with the XBOX ONE original headset

and have the same effect as connecting with the controllers, the new controller also can

Be compatible with original earphone for PS4 and iphone .

9.It is in sleeping mode while the XBOX one handle sleeps, Please press

：