Amptweaker Bass tight fuzz Manuel - Sayfa 3

Müzik Pedalı Amptweaker Bass tight fuzz için çevrimiçi göz atın veya pdf Manuel indirin. Amptweaker Bass tight fuzz 4 sayfaları.

Battery Door–

The battery

door is held

closed by a

magnet, and

can be opened

just by pulling

sideways

Specs:

• Input impedance: 250K Ohm (effect on)

• Output Impedance: 1K Ohm (effect on)

• Current: 11mA with 9V battery, 22mA with 9V adapter,

45mA with 18V adapter (adapter adds knob LEDs)

• Adapter: 9-18VDC adapter w/5.5mm X 2.1mm positive

barrel, center ground(-)

• Housing: 14 Gauge galvanized steel

• Weight: 2 pounds, Dimensions: 3.75"W X 5"D X 2"H

EFX Loop Switch–selects Pre(before) or

Post(after) position of the Loop. Usually

Compressors sound best on Pre, while

Delays or Chorusʼ sound better on Post

Battery Switch–

This switch turns

off the battery

when not in use-

not active when

using an adapter

Effects Send & Return– Itʼs

easy to create your own effects

chains using this series loop–

and the added effects track the

Bass TightFuzzʼs On/Off Switch

LEDs–light up

the knobs if an

adapter is used