AMQ ACTIV Kullanıcı ve Sorun Giderme Kılavuzu - Sayfa 7

İç Mekan Mobilyaları AMQ ACTIV için çevrimiçi göz atın veya pdf Kullanıcı ve Sorun Giderme Kılavuzu indirin. AMQ ACTIV 12 sayfaları. Height adjustable sit-to-stand benching
Ayrıca AMQ ACTIV için: Kurulum Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Montaj Kılavuzu (16 sayfalar)

Sayfayı Yazdır

Handset Lock

1 .

Press and hold the "M" button (about 5 seconds) until the LED display shows "LOC" .

2 . Release the button . The handset is now locked and no buttons will work .

Handset Unlock

1 .

Press and hold the "M" button (about 5 seconds) until the LED display switches from "LOC" to the

height number .

2 . Release the button . The handset is now unlocked and fully functional .

Choosing one-touch or constant-touch for memory preset buttons

ACTIV allows you to choose either one-touch (press and release) or constant-touch (hold until desired

height is reached, allowing you to release early if a different height is preferred) for controlling your memory

presets .

1 .

Press the DOWN button on the Handset until the base reaches its lowest position . Release .

2 .

Press and hold the DOWN button again until the LED display reads "ASR" .

3 .

Press and hold the "1" button until it switches to either:

10 . 1 = One-Touch

10 .2 = Constant-Touch

4 .

"ASR" will show on the display .

5 .

Finish the reset process by pressing and holding the DOWN button until the desk lowers a little bit

more, slightly rises and stops . Release the button . The new setting is saved and your desk is now ready

to use .

Setting the LED Retracted Height

Press the DOWN button on the Handset until the base reaches its lowest position . Measure the distance

from floor to the top surface of the desktop . If the number on the LED display does NOT match your

measurement, follow these steps:

1 .

Press and hold the DOWN button until the LED display reads "ASR" . Press and hold the "M" button

(about 5 seconds) until the LED displays the flashing height . (If the display returns to "ASR" before the

next step is taken, repeat this step .) Use the UP/DOWN buttons to change the value of the starting

height so that it matches your measurement . Wait about 5 seconds and the display will return to "ASR . "

2 . Finish the reset process by pressing and holding the DOWN button again until the desk lowers a little bit

more, slightly rises and stops . Release the button . The new starting height value is saved and your desk

is now ready to use .

Note:

LED display has a + 0 . 1 tolerance .

Setting a Custom Maximum Height

1 .

Use the UP button to move the base to the desired maximum-height position .

2 . Press the "M" button and release . The LED display will show "S- '' .

3 . Then press the "UP" button and release .

4 . Then press and hold the "M" button until the LED display will show "999" . The new maximum height is

now set .

Activ-Pro User / Troubleshooting Guide | 7

amqsolutions.com