DQ Vela Electric Talimatlar Kılavuzu - Sayfa 16

Isıtıcı DQ Vela Electric için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. DQ Vela Electric 18 sayfaları.
Ayrıca DQ Vela Electric için: Kurulum ve Sabitleme (4 sayfalar), Talimatlar (2 sayfalar)

Sayfayı Yazdır
DQ Vela Electric Talimatlar Kılavuzu
CHRONO MODE - PROGRAMMATION
a) Set the current day and time
- Activate the "Stand-by" mode and press the [Chrono] key for more than 3 seconds.
- The screen will display the words: "Time";
- Press the [Prog] key to enter the mode;
- Set the current year with the [+] and [-] keys;
- Press the [Prog] key again to confirm;
- Set the current month with the [+] and [-] keys;
- Press the [Prog] key again to confirm;
- Set the current day with the [+] and [-] keys;
- Press the [Prog] key again to confirm;
- The display now shows the current time to be confirmed;
- 'Hours': use the [+] and [-] keys to set the hour and confirm with the [Prog] key;
- 'Minutes': repeat the same procedure and confirm with the [Prog] key;
- Finally, the thermostat returns to "Stand-by" mode;
b) Set the program for Chrono mode:
- Access "Stand-by" mode and press the [Chrono] key for more than 3 seconds.
- At the top of the screen you will see the words: "Time".
c) To use a predefined mode or to use one of the two programmable modes (Pr8 and Pr9), press the [Stand-By / ON]
key and exit the stand-by mode, press the [Prog] key until what the screen displays the symbol is displayed.
The program used is displayed in the upper part of the screen (from P1 to P9), the programs are selected by pressing
the [Chrono] key, in the external part of the screen it is possible to see the command bars of the indicated program
time.
The diagrams of the 7 predefined programs are shown below:
MADE IN ITALY