Comelit IPCAM702A Hızlı Kullanım Kılavuzu - Sayfa 8

Güvenlik Kamerası Comelit IPCAM702A için çevrimiçi göz atın veya pdf Hızlı Kullanım Kılavuzu indirin. Comelit IPCAM702A 11 sayfaları.

Resetting to the factory default settings

To reset the Network Camera to the original factory settings, go to the Setup>System>

Maintenance web page (described in User's Manual, "System > Maintenance") or use the

Reset button on the network camera, as described below

Reset Button

1. Switch off the Network Camera by disconnecting

2. Press and hold the Reset button while reconnecting

3. Keep the Reset button pressed during about

4. Release the Reset button.

5. The network camera resets to factory defaults and

[IPCAM720A]

1. Switch off the Network Camera by disconnecting

2. Remove the front cap of the camera.

3. Press and hold the Reset button while reconnecting

4. Keep the Reset button pressed during about

5. Release the Reset button.

6. The network camera resets to factory defaults and

[IPCAM700A]

the power adapter.

the power.

2 seconds or more than.

restarts after completing the factory reset.

the power adapter.

the power.

2 seconds or more than.

restarts after completing the factory reset.