Amrotec MiB-11V Manuel - Sayfa 3
Para Sayma Makineleri & Bozuk Para Ayırıcılar Amrotec MiB-11V için çevrimiçi göz atın veya pdf Manuel indirin. Amrotec MiB-11V 6 sayfaları. 2 pocket discriminator
Ayrıca Amrotec MiB-11V için: Operatör El Kitabı (2 sayfalar), Operatörün Hızlı El Kitabı (2 sayfalar)
Sayfayı Yazdır
4. In "IP address", you must enter the IP address of the machine and change the last set of numbers
(eg. if machine IP address is 192.168.10.50 change to .192.168.10.70)
a. To find machine IP address press 9[Menu] > 5.Interface > 4.IP address > 1.Machine IP
address
5. In "Default gateway", enter the machine IP address but change the last set of numbers to 1 (eg.
192.168.10.1). Please OK and Exit. Machine at this point should be connected to your PC.
6. For data sampling, please proceed with steps below
Step #1: [Selection of Proper settings on MiB-11]
1) First, make sure that MiB-11 machine is connected to the PC using RJ45 connector (LAN Port) as
described in above steps 1-6.
2) Once properly connected through proper cable, please select correct image settings options on the
machine in order for capturing correct images required for banknote data sampling.
3)
Press [MENU] key [MODE] key on the MiB-11 control panel to enter into the
Download Target
4) Once you are on this Download target, press START/ENTER key to reach to next sub-menu item for
type of selection. You need to choose any of the option below according to the requirement of sampling
Service Menu