AIRSHIP DR350B Kullanıcı Kılavuzu - Sayfa 13

Dronlar AIRSHIP DR350B için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AIRSHIP DR350B 16 sayfaları. Obstacle avoidance drone

Gyroscope Calibration

Take the drone in your hand and shake it back and forth a few times to put it into Gyroscope

Calibration Mode. When the LED lights start to blink, the sensors are ready to be calibrated.

Place the drone on a flat level surface during the calibration period. When the LED lights

have turned solid, the calibration is complete.

Tips for Safe Operation

• It is recommended to only fly indoors. Do not fly this unit outside.

• Avoid areas with obstacles like ceiling fans, delicate furniture, etc.

• Try to avoid walls and ceilings, as the craft may be drawn towards them if closer than

2-3 feet.

• If you get into trouble, use the remote to land the craft and power down.

• If anything obstructs the rotors, wait for them to stop spinning. Power off the craft and

safely clear the obstruction, then check for possible damage before flying again.