Comelit 1469 Programlama Kılavuzu - Sayfa 9
Kayıt Ekipmanları Comelit 1469 için çevrimiçi göz atın veya pdf Programlama Kılavuzu indirin. Comelit 1469 10 sayfaları.
Ayrıca Comelit 1469 için: Teknik Kılavuz (11 sayfalar)
Sayfayı Yazdır
| Table of contents |
LOCK-RELEASE WITHOUT CALL
This section is used to configure the actions to be carried out if a lock-release command is sent, using a
suitably configured button, from the internal unit while there is no call with an external unit in progress.
•
Action 1: enable action 1
•
Relay: select the relay to be activated
◊ SE output: the SE output for the external unit is activated
◊ Relay output: the relay output for the external unit is activated
◊ Virtual output 1: virtual output 1 for the external unit is activated
•
ViP address: ViP address for the external unit on which the output is to be controlled
•
Action 2: enable action 2
•
Relay: select the relay to be activated
◊ SE output: the SE output for the external unit is activated
◊ Relay output: the relay output for the external unit is activated
◊ Virtual output 1: virtual output 1 for the external unit is activated
•
ViP address: ViP address for the external unit on which the output is to be controlled
Maintenance
Restarting the device
Proceed as follows:
1. Select the module in the Devices list
2. Right-click on the description (a pop-up with 5 sub-menus will appear)
3. Select Restart device or click the
button on the menu bar
9