AMS AS5147 Kullanıcı Kılavuzu - Sayfa 3

Kontrol Ünitesi AMS AS5147 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AMS AS5147 13 sayfaları. Usb interface & programming box
Ayrıca AMS AS5147 için: Manuel (9 sayfalar)

Sayfayı Yazdır
AMS AS5147 Kullanıcı Kılavuzu
USB I&P Box
User Manual
1

General Description

This Manual explains how to use the USB I&P Box.
The USB I&P Box is a Programming-Tool for Magnetic Position Sensors with I2C or SPI Interface.
After connecting a Magnetic Position Sensor to I&P Box you can open the GUI on your computer
and start programming.
For programming a Magnetic Position Sensor the sensor should be mounted on a PCB to get
connected with all the necessary pins of the sensor.
For Position Sensors, ams provides Adapterboards where an easy access from the Sensor to the
USB I&P Box is possible (not in the Tool-Kit included)
Figure 1:
USB I&P Box
www.ams.com
Revision 1.4 / 09/09/2015
page 3/13