AmScope 340 Series Kullanıcı Kılavuzu - Sayfa 10

Mikroskop AmScope 340 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AmScope 340 Series 16 sayfaları.

340 Series

Adjusting the Condenser & Diaphragm

1. Using the condenser-adjustment knob, you can change the distance between the light condenser and the stage.

This allows you to control the concentration of the light hitting your slide.

2. By changing the aperture (hole size) of the iris diaphragm, you can adjust the background brightness. Adjust the

aperture of the iris diaphragm using the iris adjustment slider located directly under the stage.

3. If you want to use a color filter, swivel the filter holder out, towards you. You can now place the desired color

filter into the circular opening. Slide the filter holder back to original position before observation.

Note: The filter holder is placed in from the factory in a manner in which it swings out and hits the arm of the

microscope (backwards). If this happens, simply grip the condenser assembly and rotate it. It may take a small

amount of force to rotate it, but after doing so, you will be able to swing the filter holder out towards the front of

the unit for easier operation.

The AmScope T340 viewing head uses a simul-focal design which allows you to use both eyepieces and the

trinocular photo port simultaneously.

lenses. C-Mount cameras must be equipped with a C-Mount to 23mm compensating lens. With the lens attached

to the camera, simply slide the 23mm lens into the photo port. If the camera's image is not parfocal with the

eyepieces, the 23mm metallic tube on the top of the trinocular port can be adjusted by rotating clockwise or

counter-clockwise to vary the focal length.

The photo port uses a 23mm tube for use with compensating (reduction)

Operation