AmScope B200 Çalıştırma Talimat Kılavuzu - Sayfa 11

Mikroskop AmScope B200 için çevrimiçi göz atın veya pdf Çalıştırma Talimat Kılavuzu indirin. AmScope B200 16 sayfaları. B series biological microscope

Sayfayı Yazdır

5.1.4 Plastic should be cleaned by soft cloth with clear water.

5.2 Environment of using and placing

5.2.1 Microscope should be used and placed in a cool, dry, non-dust, non-shake and

non-corrosive gases environment.

5.2.2 Microscope should be used in environment of indoor temperature 0°-40°C and

maximum relative humidity 85%.

5.2.3 Removing humidity equipment is suggested to be installed when microscope

used in heavy humidity area to avoid fungus and mist damage instrument.

5.2.4 Please pay attention to prevent microscope from violent shake and vibration in

application and in carrying. Don't drag it on the surface of worktable to avoid

damage microscope and worktable.

U screw Knurled

Thum b S crew

Lam p Adjustm ent

C over

5.3 Replacement of bulb (Shown in Fig.7)

5.3.1 Turn off power, and pull out plug.

5.3.2 Wait the bulb become cool.

▲ Please be sure that the bulb is cool, then follow by the operations.

5.3.3 Lay aside the microscope reliably, unscrew the knurled thumb screw of the

Knurled

Thum b S crew

Fig.7 Replacement of Bulb

Pull O ver

The Lam p

Housing C over,

Replace Bulb,

C lose C over

Bulb