Dr. Mach Mach 380 Montaj Talimatları - Sayfa 9

Dış Mekan Işığı Dr. Mach Mach 380 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Dr. Mach Mach 380 14 sayfaları. Stand lamp

Mach 380 / Mach M3 Stand model

Caution:

Always draw plug from mains before doing any work at the lamp, stand or power supply.

The electrical connection between stand tube, spring arm and lamp is ensured by sliding con-

tacts.

Connect the mains supply.

Check the function of the lamp.

59520001

6. Electrical connection

Threre can be connected three additional de-

vices to the plug strip of the stand.

Attention: We recommend to consult an

electrician before connecting additional

devices in order to avoid electrical overload

of the stand.

Leakage current

When several devices are connected to one

main plug, the sum of the leakage currents

may exceed the maximum limit.

Additional devices

In case the device is used in the patient

area together with other devices, these de-

vices must be supplied by a isolation trans-

former, or connected to the earth protection

system, if the additional devices do not

comply with standards IEC 601-1 and IEC

601-1-1.

For safety reasons the safety plugs are cov-

ered with the cover 15.

For connecting additional devices proceed as

follows:

• Turn off the lamp.

• Loosen the four screws 16 with an Allen key

• Connect the additional devices.

• Fix the cover 15 with the four screws 16.

Edition 10

DANGER

width 5 and remove the cover 15.

11.08.2004 / Bak Page 9/14

Dr. Mach

Lamps and Engineering