AIRSLED MP3481-VS Kullanıcı El Kitabı - Sayfa 5

Jacks AIRSLED MP3481-VS için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AIRSLED MP3481-VS 9 sayfaları. 3-in-1 multi-purpose mover

GOING OVER POROUS SURFACES SUCH AS CARPETING

All Airsled systems come with plastic Rough Surface Adapters (RSAs). The RSAs are 10" wide x 36" long

and laid on top of the porous surface. The air beams MUST BE PLACED OVER THE RSAs in order for

your system to perform properly. See figure 6. Your system comes with 6 RSAs allowing you to create a

short track to move the load. If moving the load over long distances, heavy carboard paper such as Ram

Board

floor protection can be used. See figure 7.

Figure 6

CARE AND MAINTENANCE

Airsled systems are proudly made in the USA using the highest quality materials. If properly used and maintained,

your Airsled product will have a long service life. To ensure optimal performance and longevity, we recommend the

following:

•

Keep the edges of the air beams from striking hard objects.

•

When moving or repositioning the air beams, avoid dragging the corners.

•

Avoid lifting and carrying the air beams by the inlets. Carrying the air beams by only the inlets may

cause them to come loose over time.

•

Periodically inspect the blower filter and bag depending on model. These components should be

cleaned to ensure peak performance of the system's blower.

•

Check the rubber fabric for rips and dirt. If dirty, water with a mild detergent can be used to clean

them as well as household cleaning sprays such as Windex

Armor All

is recommended.

•

If you find any rips in the fabric, please see the Repairs and Refurbishment section.

Figure 5

. To restore the rubber fabric's shine,

70 – A Aleph Dr.

Newark, DE 19702

Page 4 of 8

Figure 7

Support Email:

Toll Free Number: 1-800-AIRSLED (1-800-247-7533)