AIRSLED VM2400 Kullanıcı El Kitabı - Sayfa 6
Otomatlar AIRSLED VM2400 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AIRSLED VM2400 9 sayfaları. Vending mover
Ayrıca AIRSLED VM2400 için: Kullanıcı El Kitabı (9 sayfalar)
Sayfayı Yazdır
Cracked hose inlet. If you notice a crack in the plastic inlet connected to the air beam, you can wrap
the outer edge in tape after the surface has been cleaned and dried. We recommend that you replace
the inlet which Airsled sells.
Loose hose connections. Over time, the soft ends of the hoses may become stretched out causing
them to lose their snug fit. You can temporarily wrap the male ends with tape to establish a tighter seal.
We recommend that you replace the hoses which Airsled sells.
70 – A Aleph Dr.
Newark, DE 19702
Page 5 of 8
Support Email:
Toll Free Number: 1-800-AIRSLED (1-800-247-7533)