Electrolux 725239 Kullanıcı Kılavuzu - Sayfa 14

Buzdolabı Electrolux 725239 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Electrolux 725239 18 sayfaları. Vertical refrigerators
Ayrıca Electrolux 725239 için: Manuel (34 sayfalar)

Sayfayı Yazdır

• remove all food from the compartment and clean the inside

and accessories;

• clean the cabinet, going over all the stainless steel surfaces

vigorously with a rag moistened with paraffin oil to create a

protective film;

TROUBLESHOOTING

I.1

Introduction

Certain faults may occur during normal use of the appliance. In

some cases, faults can be eliminated easily and quickly by

following the indication below.

The display, if present, always shows a warning message or

alarm describing the occurring fault.

If the fault persists, contact the Customer Care Service:

1. Disconnect the appliance from the main power supply;

2. Switch off the safety circuit breaker ahead of the

appliance;

3. Remember to specify:

I.2

Troubleshooting

TYPE OF

ANOMALY

ALARM

CLN

ALARM

Ser

ALARM

• leave the door or drawers, if present, open so that air can

• periodically air the premises.

DESCRIPTION

POSSIBLE CAUSES

• Connector unplugged;

Compartment

• Probe and/or Probe wire

sensor fault

damaged.

• Connector unplugged;

Evaporator sensor

• Probe and/or Probe wire

fault

damaged.

Condenser sensor

fault

Probe and/or Probe wire

• Position of condenser

probe is not correct;

• Fan condenser not

working;

Condenser cleaning

• The condenser is dirt or

alarm

the grid has tapped holes;

• The unit cannot dissipate

heat because of its

positioning.

• Position of condenser

probe is not correct;

• Fan condenser not

working;

Condenser high

• The condenser is dirt or

temperature

the grid has tapped holes;

• The unit cannot dissipate

heat because of its

positioning.

• Internal error

Communication

disconnected;

error between con-

• Electronic boards;

troller and LED lamp

• Electronic board failure.

circulate inside, preventing the formation of unpleasant

odours;

• the type of fault

• the appliance PNC (product number code)

• the Ser. No. (appliance serial number).

IMPORTANT

The appliance PNC and serial number are essential

for identifying the type of appliance and date of

manufacture.

The dataplate giving the product and technical data

is located inside the appliance. The plate giving the

appliance PNC code and serial number is located in

the unit compartment.

•

Connector unplugged;

•

damaged.

• Use a vacuum cleaner and

• If the alarm persists Call

• Use a vacuum cleaner and

• If the alarm persists Call

• The appliance will continue

• Try to switch the unit OFF/

• If the problem persists, Call

ACTIONS

CALL SERVICE

remove any dust/dirt from

the condenser inlet-air grid.

Service.

remove any dust/dirt from

the condenser inlet-air grid.

Service.

working with reduced func-

tionality (door opening

cannot be detected);

On;

Service.